Commonly known as steam carpet cleaning, hot drinking water extraction cleaning use high pressured hot water to agitate the carpet fibre and dissolve dirt in the carpet. Different equipment manufacturers differentiate themselves by developing their own cleaning compound or powders formula and customizing their equipment design and function.
Hot water removal cleaning typically involves software of cleaning agent on soiled surface, agitation of carpet with brush and accompanied by rinsing. After cleaning agent settle in the carpet for a quick duration, the carpet will be “washed” with a rug cleaning Calgary equipment to rinse out the cleaning agent carefully and finally left to dry in room or air conditioned temperature
A great average sized carpeted office of 3000 sq foot would normally take about 2 hours to wash and will take at minimum 4 hours to dry. Most companies would suggest carpet to be washed in the late evening so that after it is done, the carpet can be left to dry over night and office procedure can curriculum vitae back to normal the next morning.
Shampoo rug cleaning was popular till encapsulation technology was introduced in 1970s. While shampooing it may seem to be to clean heavily soiled carpet, the technology’s disadvantage – leaving behind high amount of wet foam elements in the carpet that takes a while to dry, becomes sticky when it dries because no wash it is done after shampooing and rapid re-soiling of carpet – makes this method less popular than others.
Foam encapsulation use synthetic detergents as a base that will decide upon into powder form when dries. Loosened dirt particles in carpet fibre will be encapsulated into powdered when the applied cleaning foam dries and, finally, vacuumed or brushed when the foam dries after cleaning.
The foam encapsulation cleaning technique has overtaken carpet shampooing technology as the former uses less water during cleaning which cause shorter drying time compared to the carpet shampooing. The foam encapsulation cleaning has received thumbs upwards by those who advocate using of environmental friendly products because there is less chemical residue remaining behind after cleaning in contrast to carpet shampooing.
Even though this technique has shown good cleaning results, this cleaning method has not been able to thoroughly clean heavy soiling carpet as a result of technology’s limitation.
This rug cleaning produce good surface cleaning result as the process mainly involve cleaning the top part of the carpet fibre by using a heavy duty motorized machine with a spinning protect that has been immersed with cleaning solution to absorb dirt from the carpet surface.
Bonneting is popular in hotels because it can provide a quick fix solution to clean carpet in heavy traffic public area that require carpet to be cleaned out with little moisture and can dry quickly to prevent triggering inconvenience to hotel guests.
Because bonneting does not clean carpet deeply, dirt beneath the carpet would emerge back to the top within short period of time, leading to carpet to get soiled again quickly. Bonneting also tends to cause accumulation of chemical residue in the carpet as pressure from the heavy machine on the spinning pad push the applied chemical and remaining dirt into the carpet.
Dry carpet cleaning or compound cleaning is one of the latest cleaning technology present in the market and has gained increasing popularity and mortgage approvals by leading carpet manufacturers due to the effective cleaning performance and convenience as it does not require drying time.
Since it was invented in 1980s, there are extensive types of cleaning compound or powders which may have been developed in the market. As this technology is known as relatively new in comparison to other conventional moist carpet cleaning methods that contain been trusted and used for decades, many still doubt the effectiveness of this cleaning technology.